What Is Valve Lockout Devices And Its Uses?
Have you ever heard about the valve lockout device? It is the safety device accessed for effective lockout procedures in the work environment.
It allows the industry workers to isolate or close off the stored energy such as electricity and hydraulic pressures. The major purpose of valve lockout is to prevent harmful accidents during repairs and maintenance.
In simple words, the valve lockout is used to close off pressured valves to make sure that the machinery, which is valve operated, remains switched off when workers are performing maintenance work.
Moreover, this device is often attached over the valve’s operational part before securing it in place with the hasps or padlocks. If you want to know about the valve lockout device uses, then you should read the below section carefully.
Features of the valve lockout
Upon reading the above section, you will know the important purpose of valve lockout. Here are the potential features of the valve lockout. In addition, it helps you understand the importance of spending on this device.
- Valve lockout is extremely easy to use and install
- It is made of nylon and industrial-grade steel material for durability
- It is powerful enough to lock commonly accessed sizes of pressured valves at the right angles.
- The valve lockout device has excellent resistance to corrosion, high temperature, and solubility.
- It has a high safety factor and has become applicable to different manufacturing fields.
Uses of the valve lockout devices
The purpose of valve lockout is extensive, and thus it is widely used in different industries where safety is a big concern. You can use the valve lockout for the valves that contain storage tanks, gate valves, shut-off valves, and much more.
However, the valve lockout helps eliminate the industrial mishappenings throughout the world caused by unanticipated equipment startups and unexpected energy releases.
Furthermore, even though valve lockout device uses are diverse, the most highlighted usage is that it locks most types and sizes of valves. It ensures safety and gives ultimate protection to the workers. It has become the must-have equipment in the industry where the risk of injury and accident is high for the workers.
Since it acts as the best investment compared to the disposable and environmentally unsustainable alternative, you will save more of your money.
Moreover, to avoid hassles, you should choose the right valve lockout suitable for your industrial requirements. Most importantly, you should join hands with the reliable Safety Lockout Products manufacturer to get high-quality devices.
As you have realized, do you want to purchase the best quality valve lockout devices? Well! You can shop at a reliable destination and get high-quality lockout values at a reasonable rate.
Top Valve Lockout Devices From Safety House Loto
Common Yet Useful Lockout Devices
1. Circuit Breaker Lockout Devices: These are automatic electrical switches that are designed to protect circuit boards from overload or short circuit. At Lockout India, circuit breakers are designed to work on most varieties of breakers including single-pole and multi-pole breaker specifications.
These are used to isolate a given breaker in a panel so there’s no further need to lockout the entire breaker. Molded from durable plastics, their basic task however is to detect faulty conditions and automatically open the circuit.
2. Valve and Pneumatic Lockout Devices: Just like electricity, gases and fluids can be significantly hazardous. They tend to move at tremendous pressures and can severely injure if released inappropriately. Valve lockout devices are designed to isolate such hydraulic energy sources. There are different types of available valves such as ball valves, butterfly valves, gate valves, and pneumatic disconnects.
3. Plug Lockout Devices: Portable cords and connected plugs are a common site in work facilities. However, it is important to isolate such electrical sources into a socket using a power plug if one needs to comply with OSHA’s standards.
Our secure design locks onto prongs to prevent them from getting inserted into wall outlets. It can be used with your existing lockout hasps and padlocks.
4. Cable Lockout Devices: This device secures, holds, and locks out electrical power handles and gate valves. Cable lockout devices are conveniently isolated energy and are easy to use. They further ensure successful lockout across multiple energy sources and stop the workforce from actualizing devices while the maintenance is being carried out.
5. Lockout Hasp: Hasp lockout devices are an integral part of a successful safety program. They provide multi-person lockout and multiple padlocks can be applied hasps, allowing the energy to be isolated by more than one worker at a time.
Energy cannot be worked upon until each worker unlocks the padlock. Our wide range of hasps includes dielectric hasps, dual jaw hasps, electroplated hasps, labeled hasps, premier lockout hasps, and non-conductive hasps.
When are these devices used?
– While machinery is being serviced or maintained
– While installing new equipments and machineries
– When a safety device needs to be bypassed or removed
– Moving machineries and equipments
– Any machinery prone to unexpected start-up
Most importantly, whenever a lockout safety device is applied to a machinery, it must remain under exclusive observation and shouldn’t be removed by any unauthorized personnel. manufacturer of lockout products
Checkout Our Other Lockout Tagout Products:
- Scaffold Tag
- MCB Lockout
- Lockout Padlocks
Enquire NowAlso read: How to Use Electrical Lockout Devices and Equipment?
Also read: Types of Lockout Tags & Its Usage for Industrial Safety
Why Valve Lockout Devices Are A Necessary Workplace Requirement
The safety and security of the workforce is important for any organization and it is their duty to ensure that the employees work in a hazard fee environment. The unexpected energization or startup of machines can pose some serious threat to the workers. Lockout Tagout Products provides protection that hold energy isolation devices in a safe position and prevents the release of hazardous energy and prevents machines or equipments from getting energized. In case machinery that the company employee is servicing or maintaining unexpectedly energizes, starts up, or releases stored energy then it can have very fatal consequences and injure the worker concerned.
Valve Lockout Devices For Workplace
Similarly valve lockouts prevent the occurrence of any harmful accidents during maintenance or repairs. With the help of Valve lockout devices workers can close off or isolate energy sources such as electricity and hydraulic pressure. By the statistical data compiled by OSHA (Occupational Safety and Health Administration) three million workers that majorly include electricians, machine operators, and laborers face this risk at work places. A victim can fracture their arms or legs, get burnt or electrocuted in the light of such an accident occurring. This is a serious issue on a personal level as the life and physical health of a laborer is concerned and also staff getting injured would gravely affect the productivity of an establishment.
Valve Lockout device is easy to use, safe and an inexpensive way to secure valves and prevent injury. They are used at workplaces to close off different kinds of pressured valves, these devices ensure that machineries that are value operated do not accidentally start working and remain switched during any maintenance work. The Valve Lockout Devices are attached over the operational part of the valve.
Safety House, the best manufacturer of lockout products In Delhi emphasis on taking prevention measures rather than waiting for accidents to happen. We also manufacture a wide range of the best Valve lock out Device.
Checkout Our Other Lockout Tagout Products:
- Scaffold Tag
- MCB Lockout
- Lockout Padlocks
- Loto Kit
Enquire Now 