Safety Precautions While Working Around the Lockout/Tagout Equipment
Lockout/Tagout equipment is designed to protect employees involved in maintenance and service activities. It safeguards against the unexpected start-up of the machine and the release of stored energy, which could cause major accidents and injuries. Many companies now follow the Lockout Tagout Safety Program to prevent major accidents.
Since implementing the effective lockout program does not need a heavy investment of money and time, many companies have adopted this program. But, it is mandatory to follow certain safety precautions while working around the Lockout Tagout equipement. Or else the employees will confront too many hassles. Sometimes, it puts their lives at risk.
Do you want to know in-depth about those safety precautions? Well! Scroll down your eyes!
What are the major safety precautions to follow?
The lockout/Tagout standard needs the hazardous energy sources to be isolated and rendered inoperative before starting maintenance. These energy sources include mechanical, electrical, hydraulic, chemical, mechanical, and the force of gravity.
Overlooking an energy source has proved fatal in many situations. Even though basic training is provided to all the employees, it is mandatory to follow these safety precautions. It guarantees that your employees will be at the risk.
- Neutralize all the appropriate power at the source. For instance, you can block movable parts, disconnect electricity, and release spring energy.
- Lock out all power sources and ensure every worker has a personal lock.
- Employees involved in maintenance work should communicate about the Purpose of lockout tag-out and identify all the appropriate power sources, whether far or near the job site.
- It is always important to think, plan and check the equipment to avoid potential problems. Prior planning will make the whole process trouble-free.
Different ways to prevent safety problems
Even after following the safety precautions, accidents may happen sometimes. The shift change is the most dangerous situation on the job site with the lockout possibilities.
Whenever a worker leaves the machine without removing their personal lock, the worker coming on is left confused, and thus they tend to do the wrong things. But, there is nothing to worry about because the following ways assist in preventing those possible safety issues.
- Avoid allowing lockout devices to be removed during the personnel or shift change. Instead, reissue the work permit for every shift to allow the employees to inspect the equipment.
- Tell the workers to inspect whether the machine and its components are operationally intact before removing lockout devices.
If you want to purchase the best quality Lockout Kit and equipment for your firm, you can join hands with the leading manufacturer of Lockout Tagout products. You will get the best equipment within your budget and follow the safety precautions mentioned above.
You May Also Like:-
What is a Lockout Kit And Why is it Used For?
